EQUIPMENTS 1(VIETNAM) l EQUIPMENTS 2(KOREA )          1) VERTICAL CUTTING MACHINE : 2 EA THIS MACHINE CAN CUT P.E, E.V.A, RUBBER AND SPONGE VERTICALLY.   2) AUTO CUTTING MACHINE : 2EA THE MACHINE TO MANUFACTURE DESIRED SIZES SUCH ITEMS AS P.E FOAM, E.V.A SPONGE AND ALL SOFT MATERIALS.   3) HYDRAULIC DIE-CUTTING MACHINE : 2EA HTP-1000 (1EA) Feature ① No adjustments are required and replacement time of molds can be minimized. ② The half & full slitting can be done easily. ③ The performance of machines can be maximized permanently by simple operation and precise control of an electronic unit equipped with PC curcuit. Use The machine is best fitted for all paterns that require precision including such items as cover plate, circuitplate, decal comania, skin, joint publication, sponge, all prinitings, rubber, urethan, P.P/P.E/P.E.T, films and paper. Specification 모델 HTP-700 HTP-900 HTP-1100 SIZE(mm) 900×600 1000×700 1200×700 POWER(HP) 7.5 7.5 10 ※ OEM available for a special specification THE MACHINE IS BEST FITTED FOR ALL PATTERNS THAT REQUIRE PRECISION INCLUDING SUCH ITEMS AS COVER PLATE, P.E SPONGE AND POLYURETHANE, ETC.   4) HEATING CHAMBER MACHINE : 2EA CONTROLLING THE TEMPARATURE AND SPEED TO FORM FABRICS OF THE PRODUCTS WITH INFRARED (ULTRARED) RAYS.   5) HYDRAULIC PRESS MACHINE : 5EA AFTER ASSEMBLING THE FOAM MOULD. IT PRESSES THE HEATED SEMI-PRODUCTS SUCH AS BACK PANEL, HIPBELT, SHOULDER PAD.   6) LAMINATING MACHINE : 1EA IT CAN ADD THE POLYESTER FABRICS ON P.E FOAM AND MATCH ANY THICKNESS OF P.E FOAM BY ADDING VERY THIN SUB-MATERIALS.